918-283-4818 Speak with an expert

Air filter manufacturer · Claremore, Oklahoma

We manufacture the exact filter you need.

V-banks, minipleat and pocket filters, pleated panels, and nanofiber cartridges for data centers, power generation, commercial HVAC, and industrial air. Built in-house, quoted factory-direct.

Speak with an expert Find your filter
  • MERV 8 to HEPA H13The efficiency range we build
  • 7 filter familiesManufactured under one roof
  • Factory-directQuotes from the team that builds it
  • OEM cross-referenceDrop-in fit, no housing change

Who we are

A manufacturer, not a distributor.

We build our filters in-house in Claremore, Oklahoma. That means the quote comes from the team that makes the filter, custom sizes are a conversation instead of a catalog search, and your private-label run is built on the same line as ours.

Where
903 Blue Starr Drive, Claremore, Oklahoma
What
MERV 8 to MERV 16, HEPA E12 and H13
Media
Synthetic, glass, cellulose, nanofiber, ePTFE, spunbond, and biobased PLA
About Braden

Products

Seven filter families, manufactured under one roof.

From first-stage pre filters to HEPA H13 turbine cartridges. Every family is built and quoted in Claremore.

Compare all products
Braden V-bank air filter with minipleat media packs in a rigid frame V-bank FiltersRigid V-bank filters that handle high airflow at low resistance.MERV 13 to HEPA E12 Braden minipleat panel air filter Minipleat Panel FiltersThin, high-efficiency panels that fit tight spaces.MERV 8 to MERV 16 Braden pocket air filter with multiple media pockets Pocket FiltersMulti-pocket filters with high dust-holding capacity.MERV 11 to MERV 13 Braden pre filter for first-stage air filtration Pre FiltersThe first stage. They capture larger particles so the filters behind them last longer.Specs on request Braden pleated panel air filter Pleated Panel FiltersThe workhorse panel filter for buildings and data halls.MERV 8 to MERV 13 Braden industrial dust collector cartridge filter Industrial Cartridge FiltersCartridges for fume, smoke, and process air. Many sizes, shapes, pans, and flanges available.MERV 10 to MERV 16 Braden gas turbine inlet cartridge filter GT / Power Gen Cartridge FiltersInlet cartridges for gas turbines. Cylinder and conical sets, plus cylinders-only for the LM6000.MERV 15 to HEPA H13 Amaize Air biobased pleated panel filter Amaize Air biobasedBiobased filters with nanofiber media, from MERV 8A to MERV 16A.MERV 8A to MERV 16A

On the floor

Manufactured in Claremore, Oklahoma.

Real footage from our plant. The people who quote your filter work next to the line that builds it.

From a roll of media to a finished filter

  1. 01Media in stockRolls of filter media staged in our warehouse
  2. 02Media on the lineMedia unwound and run through production equipment
  3. 03PleatingMedia folded into tight, even pleats
  4. 04Pleat packsFinished pleat packs moving down the line

Industries

Built for the air your operation runs on.

  1. 01Data CentersMinipleat panels, pockets, pleated panels, and V-banks for data halls. MERV 8 through MERV 16.
  2. 02Gas Turbine and Power GenerationPulse and static inlet cartridges and V-banks for power generation. Cylinder and conical sets, LM6000 support.
  3. 03Indoor Air and HVACMinipleat, pleated, and pocket filters and V-banks for commercial and public buildings.
  4. 04Industrial FiltrationDust collector cartridges for fume, smoke, and process air: nanofiber, spunbond, ePTFE, anti-static.
  5. 05Air PurifierMERV 16 minipleat and carbon panels for air purification units. Bev-board frame, 2 to 5 inches deep.
  6. 06Biobased Air FiltersBiobased filters with nanofiber media, from MERV 8A to MERV 16A.

Filter finder

Find your filter in two clicks.

Choose your industry to see every filter we manufacture for it, with its efficiency range. Tap a row to see the specs for that filter family.

1Pick your industry

2Tap a filter to see its specs

What does a rating actually catch?

Pick a rating to see the minimum share of particles it must capture in each size range, and every Braden filter built to it.

MERV

Minimums from ASHRAE Standard 52.2 (MERV) and EN 1822 (HEPA, at the most penetrating particle size).

MERV 13

0.3 to 1 micron E150%
1 to 3 microns E285%
3 to 10 microns E390%

Braden filters at this rating

Amaize Air

Biobased filters that keep their rating.

Amaize Air filters use biobased PLA nanofiber media: plant-derived and PFAS-free. The pleated panels are wire-free. Because capture is mechanical rather than electrostatic, each filter is rated under ASHRAE 52.2 Appendix J, the MERV-A test that measures efficiency without any charge.

Explore Amaize Air
Amaize Air wire-free pleated panel filter with biobased nanofiber media

Work with us

Three ways to get the right filter.

Match what you run today, build something new, or put your brand on ours.

A forklift moving a roll of filter media in the Braden warehouse01Cross-reference an OEM filterSend the part number you run today and we match it to a drop-in replacement we manufacture. Your housing stays as it is.We cross-reference Donaldson, Parker, AAF, Freudenberg, Pneumafil, and Camfil Farr. A roll of filter media on the Braden production line02Build it customWhen an off-the-shelf filter will not fit the system, we build one to your dimensions, media, and MERV or HEPA target.PFAS-free and biobased media on request. Pleated filter media packs moving down the line03Private labelBraden produces filters for OEM partners, distributors, and private-label programs. Same media and build, your brand on the box.Production, packaging, and cross-reference documentation.

Common questions

What does Braden Filtration manufacture?

Braden manufactures air filters: V-bank, minipleat panel, pocket, pre, pleated panel, industrial cartridge, and gas turbine cartridge filters, from MERV 8 through MERV 16 and up to HEPA E12 and H13, plus the Amaize Air line of biobased filters.

Where are Braden filters manufactured?

Braden filters are manufactured in Claremore, Oklahoma, USA, at 903 Blue Starr Drive.

Is Braden a filter manufacturer or a distributor?

Braden is a manufacturer. We build our filters in-house, so you get factory-direct quotes and can order custom sizes and private-label runs.

Can Braden cross-reference an OEM filter?

Yes. Send your current OEM part number or a photo of the filter label, and Braden matches it to a drop-in replacement that fits your existing housing, with no housing change required.

Does Braden offer custom or private-label filters?

Yes. Braden manufactures custom filters to your dimensions, media, and MERV or HEPA target, and runs OEM and private-label programs with your branding on the packaging.

What industries does Braden serve?

Data centers, gas turbine and power generation, commercial HVAC and public buildings, industrial dust collection, and air purifier manufacturers.

Does Braden make PFAS-free or sustainable filters?

Yes. The Amaize Air line uses biobased PLA nanofiber media that is PFAS-free, and PFAS-free and biobased media are available on custom builds on request.

How do I get a quote from Braden?

Call 918-283-4818, email sales@bradenfiltration.com, or send a message through the contact form. Include a part number, size, or a description of your system and a Braden specialist responds directly.

Talk to the people who build it.

Call or email and a Braden filtration specialist answers directly. Or send a message with your part number, size, or application and we will get back to you.

The people who answer the phone work next to the line.

We use your details only to answer your request. Name and an email or phone number are required.

Call an expertMessage